Request a quote
Length transducers
The length transducer measures the distance of a linear movement using a steel wire looped around a measuring wheel. The steel wire must be mounted at both ends with a fixed distance between them. It is typically used as a length sensor to measure drilling depth on drill rigs and is mounted on the cradle. The transducer has two connectors for CANopen communication, including power supply, and one connector with two digital inputs. Model 022736 has a built-in termination resistor, and therefore only one CANopen connector.
Specification
| Supply voltage: | 10 – 30 VDC |
| Power consumption: | <100 mA |
| Measuring wheel diameter: | 40.0 mm |
| Digital inputs: | 2 |
| Type: | Signal 1: Active high / Signal 2: Active low |
| Bus interface: | CANopen (ISO 11896) |
| Node ID: | Standard 1 |
| Housing: | Steel housing, zinc-plated |
| Mounting: | 2 × M6 screws |
| Connectors: | CAN bus: Standard M12 A-coded connector, 5-pin male/female Digital input: Standard M12 A-coded connector, 4-pin male |
| Operating temperature: | -40 to +70°C |
| Enclosure rating: | IP67 |
Extra
Drawing
All sensors
Rotary transducers
The rotary sensor measures angle movement that is not dependent on gravity. It is typically used in a system together with other sensors to form a complete angle measurement instrument.
Explore product
Length transducers
The length sensor measures the length of a linear movement using a steel wire looped around the measuring wheel. It is typically used as a depth sensor to measure the drilled depth on drilling rigs.
Explore product
Sight / Optical transducers
The sight is used to indicate the desired blasting direction. It is typically used in a system together with other sensors to form a complete angle measurement instrument.
Explore product
Angular transducers
The sensor measures angles relative to gravity. It is typically used in a system together with other sensors to form a complete angle measurement instrument.
Explore product
Length transducers for chains
The length sensor measures the movement of the chain running through the cradle. It is typically used as a depth sensor to measure the drilled depth on drilling rigs.
Explore product
Devibench Probe
The Devibench probe is a robust borehole deviation measurement tool developed for fast measurements and quick evaluation of drilling quality.
Explore product
Do you have a question for us?
Reach out to one of our experts and get the answers you need.
