Request a quote
Sight / Optical transducers
The optical alignment transducer is used to indicate the desired blasting direction. It offers a continuous 360° range of motion. The transducer has two connectors for CANopen communication, including power supply. The unit is built for use in harsh environments where high accuracy is required. It is typically used as part of a system with other transducers to form a complete angle measurement instrument.
Specification
| Supply voltage: | 10 – 30 VDC |
| Power consumption: | <100 mA |
| Measurement range: | 360° |
| Accuracy better than: | ±0.25° |
| Resolution: | ±0.0001° |
| Bus interface: | CANopen |
| Housing: | Steel housing, zinc-plated |
| Mounting: | 2 × M6 screws |
| Shaft: | Connection plate with multiple interface options |
| Connector: | Standard M12 A-coded, 5-pin male/female |
| Operating temperature: | -40 to +70°C |
| Enclosure rating: | IP67 |
Extra
Drawing
All sensors
Rotary transducers
The rotary sensor measures angle movement that is not dependent on gravity. It is typically used in a system together with other sensors to form a complete angle measurement instrument.
Explore product
Length transducers
The length sensor measures the length of a linear movement using a steel wire looped around the measuring wheel. It is typically used as a depth sensor to measure the drilled depth on drilling rigs.
Explore product
Sight / Optical transducers
The sight is used to indicate the desired blasting direction. It is typically used in a system together with other sensors to form a complete angle measurement instrument.
Explore product
Angular transducers
The sensor measures angles relative to gravity. It is typically used in a system together with other sensors to form a complete angle measurement instrument.
Explore product
Length transducers for chains
The length sensor measures the movement of the chain running through the cradle. It is typically used as a depth sensor to measure the drilled depth on drilling rigs.
Explore product
Devibench Probe
The Devibench probe is a robust borehole deviation measurement tool developed for fast measurements and quick evaluation of drilling quality.
Explore product
Do you have a question for us?
Reach out to one of our experts and get the answers you need.
